Inspection assistant

Inspect Assist, the inspection robot for work at height

Inspect Assist automates repetitive inspections at height: thermography, 3D scanning, defect detection, rivet flushness checks or radioactivity measurement. The robot never misses a square inch and documents every measurement.

2026Robot as a Service
Inspect Assist, the inspection robot for work at height

Inspecting equipment at height demands consistency: covering the whole surface, repeating the same protocol, archiving measurements that are comparable from one campaign to the next. That is exactly what a robot does.

Combining an aerial work platform with a sensor-carrying robotic arm opens up many possibilities, in buildings and in industry.

What Inspect Assist does

  • Automated thermography, for instance of busbar trunking
  • 3D surface scanning and defect detection
  • Rivet flushness checks
  • Radioactivity level measurements
  • Coverage report with photos and positions of every measurement

On-site benefits

  • 100%Surface coverage: the robot never misses a square inch
  • 0%Strenuous work
  • 100%Of cycles completed
  • 43 mMaximum height of Haulotte lifts

Applications

Data centers and electrical sites

Thermography of electrical installations at height.

Industry and aerospace

Surface, rivet and defect inspection.

Nuclear

Radioactivity measurements without exposing staff.

Buildings

3D scanning and condition surveys of facades and structures.

The machine: Surface Assist 8

Working height
up to 26 ft (8 m) ceilings · 0–23 ft (7 m) walls
Drilling accuracy
± 0.08 in / ± 2 mm (± 1 mm with total station)
Robotic arm
6-axis collaborative, 66 lb (30 kg) incl. tool, IP65
Weight / size
2,650 lb (1,200 kg) · 78 in stowed · 31.5 in wide
Setup
30 min by a single operator, no scaffolding
Runtime
8 h on battery · 24/7 on mains power
Safety
PL d (ISO 13849-1), two 360° safety laser scanners
Environment
32–113 °F, indoor or sheltered outdoor
Datasheet (PDF)

Frequently asked questions

Which sensors does Inspect Assist carry?

The perception head includes a 3D camera, an RGB camera, laser rangefinders and an IMU; depending on the mission, a thermal camera or other sensors are mounted on the arm.

Are measurements comparable between campaigns?

Yes: positions are recorded, so the same protocol can be replayed and results compared.

Work at height to robotize?

Tell us about your project: we reply within 48 business hours.