Cleaning assistant

Clean Assist, the high-pressure cleaning and stripping robot for work at height

Clean Assist holds the lance instead of the worker: high-pressure facade cleaning, UHP stripping of steel structures, washing of formwork panels and site equipment, with a consistent path and 3D before/after traceability.

2026 · AvailableRobot as a Service
▶ Watch on YouTube

High-pressure cleaning and stripping are physically exhausting: lance recoil, spray, noise, moisture and work at height. They are also tasks where a consistent motion makes the quality of the result.

Mounted on a compatible aerial work platform, Clean Assist applies the jet along an automatically generated path. For complex geometries such as steel lattice structures, the structure is first scanned in 3D and the paths are tested in simulation before the real treatment.

What Clean Assist does

  • High-pressure cleaning of facades and structures (trials at 200 bar on facades)
  • Washing of formwork panels and site equipment (trials at 500 bar)
  • UHP stripping of steel structures, with 3D scanning and simulated paths
  • Sandblasting, laser cleaning and shot peening
  • 3D before/after traceability of every treated zone

How a structure stripping job runs

  1. 01

    Structure scan

    3D capture of the area to treat.

  2. 02

    Path generation

    Passes are computed automatically from the point cloud.

  3. 03

    Simulation tests

    Paths are validated in simulation before any intervention.

  4. 04

    Surface treatment

    The robot applies the jet at constant distance and speed.

On-site benefits

  • 0Strenuous work: no worker at the end of the lance
  • ∅No scaffolding at height
  • 24/7Continuous operation, nights and weekends included
  • 3DBefore/after traceability of every zone

Applications

Facades

Cleaning before renovation or repainting, removal of soiling.

Steel structures

UHP stripping of lattice girders, frames and steelwork.

Site equipment

Washing of formwork panels, shoring towers and steel parts in a dedicated wash area.

Industry

Equipment and structures at height, hard-to-reach environments.

On video

▶ Watch on YouTube
500-bar formwork panel washing
▶ Watch on YouTube
UHP stripping of a steel lattice structure — dry run
▶ Watch on YouTube
Robotic cleaning and painting of a facade

The machine: Surface Assist 8

Working height
up to 26 ft (8 m) ceilings · 0–23 ft (7 m) walls
Drilling accuracy
± 0.08 in / ± 2 mm (± 1 mm with total station)
Robotic arm
6-axis collaborative, 66 lb (30 kg) incl. tool, IP65
Weight / size
2,650 lb (1,200 kg) · 78 in stowed · 31.5 in wide
Setup
30 min by a single operator, no scaffolding
Runtime
8 h on battery · 24/7 on mains power
Safety
PL d (ISO 13849-1), two 360° safety laser scanners
Environment
32–113 °F, indoor or sheltered outdoor
Datasheet (PDF)

Frequently asked questions

What pressures can Clean Assist use?

Our 2026 trials were run at 200 bar for facade cleaning, 500 bar for formwork washing and ultra-high pressure (UHP) for stripping steel structures.

Can the robot handle complex shapes?

Yes. The structure is scanned in 3D, paths are generated and tested in simulation before treatment, which makes lattice girders and frames possible.

Where are people during the cycle?

Outside the robot's operating zone. The safety laser scanners stop the arm on intrusion.

Work at height to robotize?

Tell us about your project: we reply within 48 business hours.