Drilling assistant

Drill Assist, the drilling and anchoring robot for work at height

Drill Assist automates drilling and anchoring in ceilings and walls from a compatible aerial work platform. The worker stays on the ground: the robot locates the points, detects rebar, drills with dust extraction at the source and documents every anchor.

2026 · AvailableRobot as a Service
▶ Watch on YouTube

Overhead drilling is one of the most repetitive and strenuous tasks in fit-out and MEP work: arms raised, concrete dust, vibration, hours spent on a lift. On a parking-garage, tunnel or data-center ceiling, hundreds or even thousands of identical holes must be drilled at precise positions.

Drill Assist takes over the job end to end. The points are loaded from the drawing or a simple Excel file; the robot rises to height, localizes itself, checks for rebar, marks the anchor ID and drills. The platform then drives autonomously to the next zone. At the end, a detailed execution report gathers the data and photos of every point.

What Drill Assist does

  • Drilling Ø 3/16–3/4 in (5–20 mm) for standard drilling, MEP and fixings, and Ø 13/16–1 9/16 in (21–40 mm) for structural and civil works
  • Drilling depth up to 39 in (1,000 mm)
  • Positioning accuracy ±2 mm, ±1 mm with total-station registration on the BIM model
  • Rebar detection before every hole
  • Marking of each anchor's ID number
  • Flush anchors or wedge anchors, on-board anchor magazine
  • Dust extraction at the source, HEPA (class H) vacuum
  • Automatic execution report: coverage map, photos, positions

The Drill Assist cycle in 8 steps

  1. 01

    Robot setup

    The robot is positioned at the start of the work zone.

  2. 02

    Loading the points

    From the drawing or an Excel file of coordinates.

  3. 03

    Autonomous cycle start

    Rising to height and localizing in space.

  4. 04

    Moving the tool to the first point

    Rebar detection.

  5. 05

    Marking

    Marking of the anchor ID number.

  6. 06

    Drilling

    With dust extraction at the source.

  7. 07

    Next points

    All points within reach are processed without moving the vehicle.

  8. 08

    Autonomous travel

    The platform drives itself to the next zone.

On-site benefits

  • −47%Cost per hole in 24/7 operation
  • ×4Speed-up vs. manual drilling
  • ±2 mmSetting accuracy, 3D before/after traceability
  • 10Up to 10 robots supervised by one operator on site
  • 0 hOn the lift for the worker: 100% of the work from the ground
  • 100%Of points documented: data and photos of every anchor

Applications

Ceilings and soffits

Electrical, plumbing and HVAC fixings, cable trays, suspended services.

Data-center support installation

Locating, rebar detection, marking and anchoring of support points, with point-by-point traceability.

Civil works and structures

Ø 21–40 mm holes in tunnels, parking garages and structures where hole counts are high.

Facades

Fixing holes in walls, from ground level up to 23 ft (7 m) with Surface Assist 8, higher depending on the lift.

The machine: Surface Assist 8

Working height
up to 26 ft (8 m) ceilings · 0–23 ft (7 m) walls
Drilling accuracy
± 0.08 in / ± 2 mm (± 1 mm with total station)
Robotic arm
6-axis collaborative, 66 lb (30 kg) incl. tool, IP65
Weight / size
2,650 lb (1,200 kg) · 78 in stowed · 31.5 in wide
Setup
30 min by a single operator, no scaffolding
Runtime
8 h on battery · 24/7 on mains power
Safety
PL d (ISO 13849-1), two 360° safety laser scanners
Environment
32–113 °F, indoor or sheltered outdoor
Datasheet (PDF)

Frequently asked questions

Does the building need to be mapped before drilling?

No. For drilling, a simple spreadsheet of coordinates is enough, taken from the drawing or an Excel file. The robot then localizes itself; as an option, a total station provides ±1 mm registration on the BIM model.

What happens if rebar is detected?

The robot runs rebar detection before every hole to avoid hitting reinforcement; the affected point is flagged in the execution report.

How high can Drill Assist drill?

With Surface Assist 8, up to 26 ft (8 m) on ceilings and 0–23 ft (7 m) on walls. Integrated on taller compatible lifts, Drill Assist covers drilling from 0 to 43 m (141 ft).

How is Drill Assist offered?

As Robot as a Service: rental with assistance, including commissioning, operator training, maintenance and Builder Assist remote assistance.

Work at height to robotize?

Tell us about your project: we reply within 48 business hours.